| Product Name | 220V 200L/H 800W Gas Generation, Hydrogen and Oxygen Acrylic Flame Polishing Machine |
| Item NO. | PGJ-APM-L205TH-220V |
| Weight | 17.5 kg = 38.5809 lb = 617.2943 oz |
| Volume | 0.1 CBM |
| Category | Leaser Engrave > Auxiliary Machine |
| Creation Time | 2021-09-24 |
220V 200L/H 800W Gas Generation, Hydrogen and Oxygen Acrylic Flame Polishing Machine
Feature:
• Take water (Distilled water and pure water) as fuel;
• "low working voltage, cut off automatically beyond the set voltage" design;
• Improved model from APM-L205TH;
• Its electrolysis adopts series and parallel compound technique.
Description:
• Synthetic glass (acrylic) polishing, Oxy-hydrogen generator is a machine using high temperature flame to make acrylic edge smooth and bright.
• The heat polishing on the acrylic rough surface can be achieved as long as the flame passing by gently, and the acrylic products will become glittery and bright.
Used for:
• Heat treatment for metal parts.
• Weld the hinge of spectacles rim.
• Seal the injection glass bottle, conforming to GMP industrial standards.
• Fuse the lead or tin alloy plate for storage battery.
• Cut and fuse quartz or fine parts etc.
• Peel off FPC of computer, fuse LED chip and thermocouple.
• Weld jewelry made of gold, silver, copper, lead, tin casting etc, such as stud, safety pin, chain etc.
• Polish irregular acrylic surface. After polish, the work piece will be smooth and shiny.
Specifications:
Model: APM-L205TH
Shell Material: Metal
Color: Blue
Input Voltage: 220V
Machine Power:800W
Maximum Output Gas: 200L / H
Operation Gas Pressure: 0.13-0.15Mpa
Environment Temperature: -10~40℃
Electrolysis Tank Qty: 2sets
Electrolytic cell capacity: 3.6L
Replenishment cylinder capacity: 1.5L
Max. amount of water added：4.2L
Electrolytic current of electrolytic cylinder：12-14A
Water Replenishing Tank：1set
Feature:
• Strong and durable, light weight and portable.
• Save a lot of money and time for you.
• Economical and practical.
• Energy saving, environmental friendly, safe and reliable
• The edge polished by this machine is more smooth and shiny.
Note: Please clean the new machine when using it for the first time. Cleaning method: put the electrolyte into the machine, take out the electrolyte after running for 3-5 hours, and then add the electrolyte again.
More details:
Relate Parts:
No related record found