| Product Name | 350W 75-80L/HWater Electrolyzed Oxyhydrogen Flame Generator with 2 Gas Torch |
| Item NO. | PGJ-70A2-350W |
| Weight | 20 kg = 44.0925 lb = 705.4792 oz |
| Volume | 0.1 CBM |
| Category | Leaser Engrave > Auxiliary Machine |
| Creation Time | 2021-09-25 |
350W 75-80L/HWater Electrolyzed Oxyhydrogen Flame Generator with 2 Gas Torch
PRODUCT NAME：
Water Electrolyzed Oxyhydrogen Flame Generator
Other Name：
Oxyhydrogen Gas Machine, Water Welding Machine,
SPECIALTY：
No-carbon oxyhydrogen flame, small flame with high temperature, safe and easy to use, reliable, no-pollution, low cost, etc.
PGJ-70A2-350W
|
Power Input |
AC- 220+20V Or AC-110+10V 50-60Hz Total Power : <350W |
|
Volume & G.W |
Sup-Hard-Greenpaper Package：Lxwxh=54X31X46Cm G.W 20Kg |
|
Oxyhydrogen Gas Made |
About 75-80L/Hour . |
|
Electrolytic Cell |
Double Cell Body，3 +3 Layers，Special Stainless Still. .Total Volume 4000ml. |
|
Digital Ammter |
If Indicating 50-60A Machine Is Making Oxyhydrogen Gas ，Working Well. |
|
Pressure Auto-Co***Ol |
Pressure High Than 0.15mpa Switch Off；Low Than 0.09mpa Switch On. |
|
Gas Barometer |
Low Than 0.15mpa Is Right And Safe, Oil Inside For Shockproof. |
|
Torch & Nozzles |
1-2Torches With Red Copper Nozzle A, B, C, D, & Pinhole. |
|
Electrolyte（Alkali）
|
Must To Add Electrolyte At The First Time Of Use. 500g Electrolyte-Powder Mixed 2500ml Water In a Ovenproof Plastic Container . Change Electrolyte When Dirty Or Losing Efficacy. 2 Offlets In The Bottom For Changing. |
|
Consumed Fuel |
Water. Only Water，Not Add Electrolyte Again，When The Water Level Is Lower Than M Line, Please Stop Machine For Adding Water To Near High Line. Water Consumption ：About 50ml/Hour. Need To Add Water About Every 6-8 Hours From Best To Ordinary Are: Distilled Water，Purified Water，Cold Boiled Water，Controlled Water. Clean Water Is Ok，But Not Use Mineral Water. |
|
Work Environment |
0-50°C, Biggish Room Or Well Ventilated. |
No related record found