| Product Name | 300W 55-60L/H WATER ELECTROLYZED OXYHYDROGEN FLAME GENERATOR |
| Item NO. | PGJ-60A-300W |
| Weight | 15 kg = 33.0693 lb = 529.1094 oz |
| Volume | 0.1 CBM |
| Category | Leaser Engrave > Auxiliary Machine |
| Creation Time | 2021-09-25 |
300W 55-60L/H WATER ELECTROLYZED OXYHYDROGEN FLAME GENERATOR
PRODUCT NAME：
Water Electrolyzed Oxyhydrogen Flame Generator
Other Name：
Oxyhydrogen Gas Machine, Water Welding Machine,
SPECIALTY：
No-carbon oxyhydrogen flame, small flame with high temperature, safe and easy to use, reliable, no-pollution, low cost, etc.
PGJ-60A-300W-220V
|
Power Input |
AC- 220+20V Or AC-110+10V 50-60Hz Total Power : <300W |
|
Volume & G.W |
Sup-Hard-Greenpaper Package：L*W*H 37X31X46Cm G.W 15Kg |
|
Oxyhydrogen Gas Made |
About 55-60L/Hour . |
|
Electrolytic Cell |
Single Cell Body，3 Layers，Special Stainless Still. .Total Volume 2000ml. |
|
Digital Ammter |
If Indicating 50-60A Machine Is Making Oxyhydrogen Gas ，Working Well. |
|
Pressure Auto-Co***Ol |
Pressure High Than 0.15mpa Switch Off；Low Than 0.09mpa Switch On. |
|
Gas Barometer |
Low Than 0.15mpa Is Right And Safe, Oil Inside For Shockproof. |
|
Torch & Nozzles |
1Torches With Red Copper Nozzle A, B, C& Pinhole. |
|
Electrolyte（Alkali）
|
Must To Add Electrolyte At The First Time Of Use. 250g Electrolyte-Powder Mixed 1250ml Water In a Ovenproof Plastic Container . Change Electrolyte When Dirty Or Losing Efficacy. 2 Offlets In The Bottom For Changing. |
|
Consumed Fuel
|
Water Consumption ：About 40ml/Hour. Need To Add Water About Every 8 Hours From Best To Ordinary Are: Distilled Water，Purified Water，Cold Boiled Water，Controlled Water. Clean Water Is Ok，But Not Use Mineral Water. |
No related record found