| Product Name | 220V 300W 75L/H Portable Oxygen Hydro Gen Flame Generator Acrylic Polishing Machine |
| Item NO. | PGJ-H160-220V |
| Weight | 9.35 kg = 20.6132 lb = 329.8115 oz |
| Volume | 0.01 CBM |
| Category | Leaser Engrave > Auxiliary Machine |
| Creation Time | 2020-08-05 |
220V 300W H160 75L Portable Oxygen Hydro Gen Flame Generator Acrylic Polishing Machine
Feature:
• Take water (Distilled water and pure water) as fuel;
• "low working voltage, cut off automatically beyond the set voltage" design;
• Improved model from APM-H160;
• Its electrolysis adopts series and parallel compound technique.
Description:
• Synthetic glass (acrylic) polishing, Oxy-hydrogen generator is a machine using high temperature flame to make acrylic edge smooth and bright.
• The heat polishing on the acrylic rough surface can be achieved as long as the flame passing by gently, and the acrylic products will become glittery and bright.
Used for:
• Heat treatment for metal parts.
• Weld the hinge of spectacles rim.
• Seal the injection glass bottle, conforming to GMP industrial standards.
• Fuse the lead or tin alloy plate for storage battery.
• Cut and fuse quartz or fine parts etc.
• Peel off FPC of computer, fuse LED chip and thermocouple.
• Weld jewelry made of gold, silver, copper, lead, tin casting etc, such as stud, safety pin, chain etc.
• Polish irregular acrylic surface. After polish, the work piece will be smooth and shiny.
Specifications:
Model: APM-H160
Shell Material: Metal
Color: Blue
Input Voltage: 220V
Maximum Output Gas: 75L / H
Power: 300W
Operation Gas Pressure: 0.08-0.13Mpa
Environment Temperature: -10~40℃
Flame Temperature: ≥2800°C
Water Consumption (L / H): 0.015 L / H
Flame Gun No.: Single
Elecrtolyzer Capacity: 1.6L
Size: 320x220x310mm
Feature:
• Strong and durable, light weight and portable.
• Save a lot of money and time for you.
• Economical and practical.
• Energy saving, environmental friendly, safe and reliable
• The edge polished by this machine is more smooth and shiny.
Note: Please clean the new machine when using it for the first time. Cleaning method: put the electrolyte into the machine, take out the electrolyte after running for 3-5 hours, and then add the electrolyte again.
More details:
Relate Parts:
No related record found